IfItDoesntMatchAnyMedia

Specs & Features

Keeping in mind the space constraints, we have developed 3 types of charging point - a wall mounted, floor mounted and also there iss one that is perfect for cramped walls. Here are the dimensions:
Wall mounted Point with a backdrop: 880 x 970 x 85 mm (L x B x D)
Floor mounted Point with a stand: 1830 x 30 x 85 mm = (H x L x D)
Point for cramped spaces (Point & banner only without backdrop): 600 x 970 x 85 mm
Dimension of the Distribution Box: 850 x 50 x 300 mm
Dimension of the Point: 480 mm x 970 mm x 85 mm
The maximum electricity consumption for fast charging an Ather vehicle (charging 0 to 100%) will be ~3 kWh, per charging session.
The distribution box & the Point have got an IP54 & IP55 rating, respectively. What does that mean? It can bear the rain showers and the absent-minded humans, who might sometimes end up accidentally washing up the Point, along with their vehicle.
IP54 - Protection against dust and water spray from any direction.
IP55 - Protection against dust and low-pressure water jets from any direction.
Note: IP stands for Ingress Protection

Motor / Battery

Yes, as long as they have the same specifications/connector.
Range is approximately 75Km (depending on a variety of factors). The display has a bar which shows you the status of the battery.
It depends on where you live. Check the rules and regulations governing bicycle and electric bicycle use for your city, county and state. However, we always encourage riders to take every safety precaution available.

Battery Management System

BMS stands for Battery Management System. The BMS protects the cells from getting damaged — most commonly from over or under-voltage, over current, high temperature or external short-circuiting. The BMS will shut off the battery to protect the cells from unsafe operating conditions.
Not only is a BMS important in indicating the health of a battery, but it also functions to protect the battery while in operation. Each battery cell and chemistry has voltage, temperature, and current range within which it can safely operate.
A well designed BMS ensures each cell will safely and fully charge before the entire charging process is complete. Unlike Lead Acid batteries, Lithium Iron Phosphate batteries operate efficiently and safely at temperatures up to 60 degrees Celsius or more.

Other

Yes. Bring the charging cord with you, safely remove the battery from the Lopifit, and simply plug it into any regular outlet to replenish the battery charge.
It will be delivered 90% pre-assembled. For the last 10% you can use the user manual to assemble the front-wheel and handlebar.
Minimum: 1.40m / 4,5 foot
Maximum: 2.15m / 7 foot